I probably should have mentioned that we are using the In-Line/Real-
IP/Centrally deployed model for CCA. We had to go the in-line route
because we're using HUBs in each reshall room. :(
Once I get some spare time I hope to turn the MAC snmp-notification on to
go back to one of my other trap receivers....I wasn't even aware you could
do that until we looked into CCA.
Anyone know if the CAM can still receive these messages without having an
OOB server configured in it? Would be nice to capture this info for
HelpDesk tracking purposes (without writing a custom app).
Since we're using in-line mode the SNMP MAC traps won't help. :(
--greg
On Wed, 3 Oct 2007 15:28:48 -0400, Osborne, Bruce W. (NS)
<[log in to unmask]> wrote:
>Greg,
>
>It sounds like you are not using the mac-notification SNMP trap. The
>switch will send out this trap whenever there is a change in the mac
>addresses on a switch port.
>
>The port configuration should have a "snmp trap mac-notification added"
>line.
>Your config should have a line like:
>
>snmp-server host <CAM IP> version 2c <Community> mac-notification snmp
>
>
>Bruce Osborne
>Liberty University