The modem pool for dial-in access to Miami computing resources has been upgraded and expanded with new high speed modems. The current configuration is as follows: Service: 14.4 kbps V.32bis Phone Number: 529-4999 Qty: 22 Compression: V.42bis, MNP level 5 Error Correction: V.42, MNP level 5 Service: 9600 bps V.32 Phone Number: 529-2161 Qty: 10 Compression: MNP level 5 Error Correction: MNP5 level 5 Service: 2400 bps Phone Number: 529-6114 Qty: 8 Compression: None Error Correction: MNP level 3 Service: 1200 bps, Bell 212 (NOTE: This service will be discontinued 3/18/94. Please use 2400 bps service after that time.) Phone Number: 529-5777 Qty: 2 Please note the following comments concerning this upgrade of service. 1) Use the 14,400 bps service (529-4999) for newer modems of all speeds to take advantage of V.42bis compression. Note: Some users may require modem re-configuration to use higher speed services. If you experience problems with 14,400 bps service, use the 9600 bps service (529-2161). 2) Use the 9600 bps service (529-2161), if you receive a busy signal when trying to attach to the 14,400 bps service. 3) The 2400 bps modems (529-6114) can be used for connection by all speeds of modems (at 2400 bps). However, no compression is available. 4) The 1200 bps modems are primarily for use by old Racal-Vadic modems and are not recommended for connection by any other modems. Note that these modems will not be available after 3/19/94. If you are using a modem that will not connect with the other services outlined above, please contact the Help Desk at 529-7900 for assistance. 5) The Kermit scripts for access to the IBM Mainframe, the MIAVX1 Vax and Sherlock do not require modification to work with the new high-speed modems. 6) Please see the related technical announcement, "Dial-In Service Technical Notes", for recommendations on specific software and hardware configurations.